Specifying and subsequent installation of the TDC Series is simple due to the nature of its low power operating requirements

Use 2.5mm2 Toro Decoder Cable and rest assured that the system will achieve the maximum specifications without having to do any voltage drop calculations.

TDC’s simple, intuitive and easy-to-use user interface makes it a breeze to control up to 200 stations

Operate up to 20 simultaneous stations, including remote pumps and master valves, up to 4.5km from the controller.

Save installation costs on wire when compared to traditional large control systems by using two wire cable(s) from the controller

When it comes time to add stations, there is no need to run wire back to the controller. Simply just splice into the two wire path and add a decoder and valve(s). Stand-alone Controllers

Modular controller up to 200 stations

Large LCD display and simple, intuitive programming interface

20 KV surge protection at the controller with proper grounding of 10 0hms or less at the controller.

10 independent irrigation programs

6 start times per program

Day of week programming and 1-31 day interval watering schedule

Odd/Even day watering

Day Exclusions (remove a day from standard program)

Programmable master valve and pump start, by station

Manual start of each station or entire program

Water Budget by controller, by program and by station (Season Adjust) 0 to 250% in 1% increments

Non-volatile memory retains programming in the event of power outrage

Self-diagnostics circuit breaker skips shorted/open stations and continues watering

Two-way confirmation of decoder activation

Activate up to 20 solenoids at up to 4.5 km away from the controller

Programmable rain delay up to 31 days

Dual pump/master valve outputs programmable by station

12-/24-hour real time clock

Lockable, weather-resistant wall-mount cabinet.

Water window calculator

10-digit alpha-numeric zone identification

TMR-1 Remote Ready and Rain Sensor™ compatible

Up to 8 independently fused two wire paths to field decoders

Upgradable to Sentinel Central Control Decoders

1-, 2- station decoders with built-in surge protection, up to 20KV

1 or 2 solenoids per station

Utilises D.C. latching solenoids for valve control Solenoid Capacity: 2 Toro DCLS-P Solenoids per output within spec wire runs, up to 40 max simultaneous (includes dual P/MV out-puts) UL/cUL, TUV, CE, SAA and C-Tick approved