Toro Australia

STX-26 Stump Grinder (23208)

STX-26 Stump Grinder (23208)
STX-26 Stump Grinder (23208)

Request A Demo

Some dedicated stump grinders are over-complicated. Not the Toro STX-26. Its patented Toro TX-style control system has two simple levers that are simple to learn, master and use. Combine these easy-to-use controls with tracks and transport speeds exceeding 6.8 km/h, and you get maximum productivity. Wet, hilly terrain won't stop you from accessing tough jobs year-round with an STX stump grinder.

The Intelli-Sweep™ feature automatically slows the sweep speed of the cutting head based on the load of the wheel, so heavy cutting loads won’t bog down the engine. The tracks travel easily over muddy areas, while the low centre of gravity adds side hill stability. In addition, the hydraulically driven head means no chance of expensive belts breaking or slipping, no tension adjustments - guaranteeing optimal performance time after time.

Traction Controls

Traction Controls

Easy-to-use control system offers smooth operation and fewer levers/knobs than conventional stump grinders. Two simple controls operate all traction and grinder functions.

Two simple controls operate all traction and grinder functions.
1. Left/right traction control (forward, reverse, turn)
2. Sweep, lift/lower and engagement of grinder head.



Cutter head Sweep speed is automatically controlled based on the load on the wheel to maintain optimal operation, without bogging down the machine.

Track Design

Track Design

The tracks provide a low centre of gravity adding exceptional side hill stability. It eliminates tyre ruts and flat tyres and operates in wet & soft ground conditions.

Hydraulically Driven Cutter Head

Hydraulically Driven Cutter Head

The hydraulically driven head means no chance of expensive belts breaking or slipping and no tension adjustments.  Cutter head and guard design allow for exceptional below-grade grinding and easy chip management.

Offset Cutting Head

Offset Cutting Head

Offset cutting head provides operator with excellent visibility to stump and allows full rotation perpendicular to machine.

Grinder Teeth

Grinder Teeth

Easily rotate and replace grinder teeth for maximum performance and efficiency.


26 hp Kawasaki® FX730V, 4-cycle, air-cooled, V-twin 

Cutter Depth

31.8 cm below grade

Cutter Height

83.8 cm above grade


48.3 cm diameter to tooth; 1.9 cm thick

Number of Teeth

12 (6 per side)

Fuel Capacity

18.2 Litres

Head Swing

119 cm Arc


Length: 228 cm - maximum cutting reach; 199 cm - transport position
Width: 84.1 cm
Height: 128.8 cm at operator controls


544.3 kg


2 years/1000 hours limited warranty

*See your certified Toro dealer for full details on warranties.

Download Type Information
Toro Construction and Tree Care Product Range Brochure

You May Also Like