TX 1000 Wide Compact Utility Loader with Remote Control (RCTX1000)
The lightweight and manoeuvrable TX 1000 packs unmatched strength and reach in a compact package for the ultimate working advantage. Now available with a Hetronic Industrial Radio Remote Control (RRC) System.
Designed with Toro exclusive vertical lift loader arms, its outstanding hinge pin height of 81" (206 cm) to clear the side of 23 m² dumpsters and 1,000 kg trucks for maximum jobsite productivity delivers category crushing performance. The remote controls are safe, easy to operate and an independent Auger mode results in greater efficiency.
Encased in a tough, IP65, fiber enforced polycarbonate case, the lightweight, ergonomic radio remote control by HMS Equipment, is rugged and reliable; engineered for the toughest industrial environments. Offering increased safety, productivity and operational efficiency, the new TX 1000 with remote control uses patented User Interface (UI) technology for optimal control and reliability. New, fully proportional, electro-hydraulic valves deliver precise and repeatable movement under all working conditions.
Hetronic Remote Control
• Self-Test Routine: After applying power to the receiver, the software performs a self-test routine. If the self-test fails, the receiver will not power up and it will maintain its secure state.
• Enable Button - All joysticks or paddles in neutral position: After the self-test routine, the transmitter must be activated by pressing the Enable button. This engages the radio remote receiver. All proportional functions must be in the neutral position for the system to start up. This safety feature assures that no motion of the machine is activated by accident.
• Emergency Stop Switch: The transmitters have a fail-safe, push-pull E-Stop switch. For redundancy purposes, the E-Stop command is transmitted as a normally open and parallel as a normally closed contact. The E-Stop function is the most important feature of the remote. It assures that the operator can stop the machine immediately during operation.
• System Safety Address: Every radio system has its own system safety address. This address is assigned to the system during the manufacturing process. It assures that only the designated transmitter activates the corresponding receiver.
Toro Exclusive Vertical Lift Loader Arm Design
Toro exclusive vertical lift loader arms increases load capacity and greater reach at full height deliver even stronger performance.
206 cm Hinge Pin Height
206 cm hinge pin height allows attachments to easily clear the side of 23 m² dumpsters or 1,000 kg trucks.
487.6 kg Rated Operating Capacity
Rated operating capacity 487.6 kg allows the TX 1000 to lift more than any compact utility loader on the market.
24.8 hp Kubota® D1305 3 cylinder, liquid cooled, diesel
Sprocket-drive, 6 road wheels per side. The tracks are Kevlar reinforced, endless rubber rings with 37 internal drive lugs. The outer tread on the tracks is a turf friendly S shaped pattern with pitched crosscuts.
Hydraulic Pressure: 3,000 PSI
Traction: 50.35 l/min (11.1 gpm imperial) each pump
Auxiliary: 50 l/min (11 gpm imperial)
|Maximum Operating Height||
|Hinge Pin Height||
|Reach - Fully Raised||
|Hetronic Radio Remote Control||
Frequency range: 434 Mhz
Bandwidth: 25 kHz
Safety address: 20-bit (over 999,999 individual possibilities)
Transmitter: Ergonomically designed housings, fiber enforced polycarbonate (PC)
Transmitter: Environmental Protection: IP 65 (exceeds Nema 12/13)
Certificates: RCM, CE, TUV, SUVA, ISO 9001 and compliance with AS/NZS 4240.1:2009
2 years/1000 hours limited warranty
*See your certified Toro dealer for full details on warranties.
|TX 1000 Wide Compact Utility Loader with Remote Control||Brochure|
The breakthrough result of more than 30 years of tape research, development and manufacturing.