60" (152.4 cm) Z Master® 3000 (72950)
The Z Master® 3000 Series offers the perfect blend of performance, durability and value. This 152.4 cm (60 inch) model features Toro’s exclusive TURBO FORCE® cutting deck, robust cast iron spindle housings with solid 2.5 cm (1 inch) steel spindle shafts and 12 cc unitised pump and wheel motor transmissions with cooling fans for professional results and dependability.
Deluxe Handcrafted Seat with Arm Rests
Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.
Exclusive TURBO FORCE® Deck
High-capacity TURBO FORCE® decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE® decks can be fine-tuned in order to conquer changing turf conditions.
7-Gauge, High-Strength Steel
The TURBO FORCE® deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Rubber Discharge Chute
High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.
A commercial-grade carrier frame, constructed of 7.6 cm x 3.8 cm tubular steel, supports the cutting deck and stands up to the rigors of professional use.
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
24.5 HP* Kawasaki® FX 852cc
152.4 cm (52")
58.42 cm x 24.13 cm - 30.48 cm Turf Master
33.02 cm x 16.51 cm - 15.24 cm, smooth tread, pneumatic
|Maximum Forward Speed||
TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper
|Height of Cut||
2.54 cm - 13.97 cm in 0.64 cm increments
Side discharge tools adjustable baffle
|Rubber Discharge Chute||
22.9 cm (9") diameter cast aluminium
Maintenance-free ball bearings
0.6 cm thick heat-treated steel
|Blade Tip Speed||
|Carrier Frame Construction||
7.62 cm x 3.81 cm x 10 gauge
5 years/1200 hours limited warranty and 5 years/1200 hours spindle limited warranty
*See your certified Toro dealer for full details on warranties.
*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
|Toro Professional Product Range||Brochure|
You May Also Like
The breakthrough result of more than 30 years of tape research, development and manufacturing.