Toro Australia

52" (132.1 cm) Z Master® 3000 (72949)

52" (132.1 cm) Z Master® 3000 (72949)
52" (132.1 cm) Z Master® 3000 (72949)

The Z Master® 3000 Series offers the perfect blend of performance, durability and value. This 132.1 cm (52 inch) model features Toro’s exclusive TURBO FORCE® cutting deck, robust cast iron spindle housings with solid 2.5 cm (1 inch) steel spindle shafts and 12 cc unitised pump and wheel motor transmissions for professional results and dependability.

Deluxe handcrafted seat with arm rests with ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Model 72950 shown with 60" deck

Deluxe Handcrafted Seat with Arm Rests

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Exclusive TURBOFORCE® Deck

Exclusive TURBOFORCE® Deck

High-capacity TURBOFORCE® decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBOFORCE® decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

7-Gauge, High-Strength Steel

The TURBO FORCE® deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Rubber Discharge Chute

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Rugged Frame

Rugged Frame

A commercial-grade carrier frame, constructed of 7.6 cm x 3.8 cm tubular steel, supports the cutting deck and stands up to the rigors of professional use.

Folding Rollover Protection System ROPS

Folding Rollover Protection System ROPS

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminium Spindle

Cast Aluminium Spindle

Cools quickly for enhanced durability and performance.


24.5 HP* Kawasaki® FX 852cc


Cutting Width

132.1 cm (52")

Drive Tyres

58.42 cm x 24.13 cm - 30.48 cm Turf Master

Caster Tyres

33.02 cm x 16.51 cm - 15.24 cm, smooth tread, pneumatic

Fuel Capacity

30.3 Litres

Maximum Forward Speed

13.6 km/h

Deck Material

TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper

Height of Cut

2.54 cm - 13.97 cm in 0.64 cm increments

Deck Type

Side discharge tools adjustable baffle

Rubber Discharge Chute


Spindle Housing

22.9 cm (9") diameter cast aluminium

Spindle Bearings

Maintenance-free ball bearings 


0.6 cm thick heat-treated steel

Blade Tip Speed

18,300+ ft/min

Carrier Frame Construction

7.62 cm x 3.81 cm x 10 gauge


5 years/1200 hours limited warranty and 5 years/1200 hours spindle limited warranty

*See your certified Toro dealer for full details on warranties.


*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Download Type Information
Toro Professional Product Range Brochure

You May Also Like