Toro Australia

48" (121.9 cm) Z Master® 3000 (72952)

48" (121.9 cm) Z Master® 3000 (72952)
48" (121.9 cm) Z Master® 3000 (72952)


Z Master® 3000 Series mowers deliver impressive commercial-grade results and durablity, all at an outstanding value. Professional quality performance from the 20.5 HP Kawasaki® FX Series 726cc Engine. 48 in (122 cm) TURBO FORCE® deck features heat-treated steel blades and our patented adjustable discharge chute, nothing cuts as fast or as well. Super fast 18,300+ ft./min blade tip speed, high-lift, flex-resistant 1/4" thick heat-treated steel blades. Toro’s rugged spindle assemblies survive impacts that would destroy lesser spindles.

Model 72950 shown with 60" deck

Deluxe Handcrafted Seat with Arm Rests

Deluxe Handcrafted Seat with Arm Rests

Ultimate padding and back support with a handcrafted seat with arm rests and bullhorn logo.

Exclusive TURBO FORCE® Deck

Exclusive TURBO FORCE® Deck

High-capacity TURBO FORCE® decks deliver unsurpassed strength, a superior cut, and increased productivity in extreme mowing conditions. Equipped with a patented adjustable baffle, TURBO FORCE® decks can be fine-tuned in order to conquer changing turf conditions.

7-Gauge, High-Strength Steel

7-Gauge, High-Strength Steel

The TURBO FORCE® deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.

A Flat Crisp Cut with Precision Blades

A Flat Crisp Cut with Precision Blades

(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.

Rugged Frame

Rugged Frame

A commercial-grade carrier frame, constructed of 7.62 cm x 3.81 tubular steel, supports the cutting deck and stands up to the rigors of professional use.

Rubber Discharge Chute

Rubber Discharge Chute

High performance rubber discharge chute allows for close trimming without damaging chute or landscape structures. Patented design provides exceptional clipping dispersion.

Folding Rollover Protection System

Folding Rollover Protection System

A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.

Cast Aluminium Spindle

Cast Aluminium Spindle

Cools quickly for enhanced durability and performance.

Z master 3000

Z master 3000

Z master 3000

Z master 3000

Engine

20.5 hp (15.3 kW) Kawasaki® V-Twin FX651V 726 cc

Fuel Capacity

30.3 Litres

Adjustable Discharge Baffle

Standard

Air Filter

Heavy-Duty Canister

Anti-Scalp Wheels

3 Standard, 1 Optional

Drive Tyres

58.42 cm x 24.13 cm- 30.48 cm Turf Master

Caster Tyres

33.02 cm x 12.7 cm - 15.24 cm, pneumatic

Cutting Width

121.9 cm

Maximum Forward Speed

13.6 km/h

Deck Material

TURBO FORCE® 7-gauge high-strength steel with bull-nose front bumper

Deck Type

Side discharge tools adjustable baffle

Height of Cut

2.54 cm – 14 cm with 0.64 cm increments

Rubber Discharge Chute

Standard

Spindle Housing

9" (22.9 cm) diameter cast aluminium

Spindle Bearings

Maintenance-free ball bearings 

Blades

0.6 cm thick heat-treated steel

Blade Tip Speed

18,300+ ft/min

Carrier Frame Construction

15.24 cm x 3.81 cm x 10 gauge

Warranty*

5 years/1200 hours limited warranty and 5 years/1200 hours spindle limited warranty

Warranty document

*See your certified Toro dealer for full details on warranties.

Disclaimer

*The gross horsepower of these engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Download Type Information
Toro Professional Product Range Brochure

You May Also Like