Reelmaster® 3550-D
03910
Key Highlights
- 45.7 cm (18") version of fairway DPA cutting units to better handle fairway undulations.
- The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times.
- Quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.
Key Highlights
- 45.7 cm (18") version of fairway DPA cutting units to better handle fairway undulations.
- The innovative Series/Parallel 3-wheel drive system provides power to at least two wheels at all times.
- Quiet, low noise design with only 84 dB(A) at the operator's ear & 73 dB(A) at a 25-foot drive by.
The Toro® Reelmaster® 3550-D floats effortlessly over contours in fairways and green surrounds. With a productive 2.1 m cutting width, turf-friendly tyres, the superior traction of a Series/Parallel 3-wheel drive system, and a weight of less than 907.2 kg, the Reelmaster® 3550-D is engineered to make a big impression…without leaving one.
The Dual Precision Adjustment (DPA) cutting units – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.
| Engine | Kubota®, 3-cylinder, liquid-cooled diesel |
| Power | 24.8 hp (18.5 kW) |
| Fuel / Power Source | Diesel |
| Fuel capacity | 28.3 litres |
| Cooling System | Aluminum side-by-side oil cooler/radiator. 8.5 fins per inch, wavy fin, non-louvered. 5.25 quart (4.9 litre) capacity |
| Traction Drive | Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive provides infinitely variable speed in forward and reverse |
| Reel Drive | Hydraulic |
| Ground Speed | 0-16.1 km/hr forward |
| Mowing Speed | 0-11.3 km/hr |
| Tyres | 22" x 12" - 12", 4-ply, no tread tyres |
| Controls | Foot operated controls: Forward and reverse traction pedal, mow/transport speed limiter. Hand operated on control panel: Parking brake lever, ignition switch, engine throttle lever, LED headlight switch, on/off switch for cutting units, joystick for cutting unit lift and lower. Other controls: Steering wheel tilt control, reel speed control, backlap engagement lever |
| Steering Control | Hydraulic power steering, tilt wheel |
| Seat | Two-piece premium commercial two-tone grey vinyl with two armrests, mechanical suspension standard |
| ROPS | 2-post ROPS and retractable seat belts standard |
| Cutting Width | 208 cm (82") |
| Height of Cut | 6 mm - 19 mm |
| Height | 200 cm |
| Weight | 900.38 kg** |
| **Gross vehicle weight for standard configuration, including five 46 cm (18”) cutting units, with no optional accessories | |
| Warranty | 2 years limited. Refer to Operator's manual for more details |
Powerful Engine
Powered by a 24.8 hp (18.5 kW) Kubota diesel engine, the Reelmaster® 3550-D provides plenty of power to climb hills, even while running groomers and rear roller brushes.
Dual Precision Adjustment (DPA) Cutting Units
Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) cutting units allows quick bedknife to reel adjustment – featuring Toro’s EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.
Lightweight Design
With a weight that is on average 15-20% lighter then comparably equipped machines, Reelmaster® provides the ideal combination of turf friendliness and productive performance.
Superior Traction
The patented Toro Series/Parallel™ traction drive system provides steady traction in all conditions, even in wet grass and over undulating terrain. Its full-time, 3-wheel drive system maintains power to two of the three wheels at all times, minimising tyre spinouts and scuffing.
Smooth Turf Friendly Tyre
Smooth turf tyres are standard to minimise turf damage.
Enhanced Ground Following
45.7 cm (18″) version of fairway DPA cutting units to better handle fairway undulations. 55.9 cm (22″) rear cutting units can be installed to achieve additional overlap if desired.
