Groundsmaster® 4700-D
30899
Key Highlights
- The Contour™ Plus cutting technology takes quality of cut to a whole new level
- Mow up to 4.3 hectares per hour to get the job done fast
- Smart Power® traction allows even an inexperienced operator to achieve a consistent cut
Key Highlights
- The Contour™ Plus cutting technology takes quality of cut to a whole new level
- Mow up to 4.3 hectares per hour to get the job done fast
- Smart Power® traction allows even an inexperienced operator to achieve a consistent cut
Is wider better? That’s like asking if more productivity is better. The Groundsmaster® 4700-D answers with a resounding yes, in the form of an awe-inspiring 381 cm width of cut, powered by a 48 hp (36 kW) Yanmar® engine that lets you mow up to 4.3 hectare/hour. Add in 7 floating Contour™ Plus cutting units, full-time 4-wheel drive and the innovative Smart Cool™ system, and you have productivity and performance no other mower can touch.
| Engine | Yanmar® 4TNV84T diesel |
| Engine Power (kW) | 48 hp (36 kW) |
| Fuel Type | Diesel |
| Fuel Capacity | 83.3 litres |
| Cooling System | 31.2 litres capacity with 10 micron remote spin-on filter, 9 row single pass cooler with tilt out for cleaning. Variable speed hydraulic fan drive with automatic (based on coolant and oil temps) and auto/manual reversing capabilities. Rear-mount, single pass, 7-row radiator with 6.3 fins per inch, 13 U.S. qt. (12.3 L) capacity |
| Air Filter | Dry, replaceable primary and safety elements |
| Cutting Width | 381 cm (150") |
| Mowing Rate | 4.3 hectares/hr |
| Deck Design | 10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5" (3.8 cm) square x 0.25" (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16" (0.48 cm) high-strength steel and 10-gauge exterior channels |
| Blades | 27" (68.6 cm) long, 2.5" (6.4 cm) wide, 0.25" (0.64 cm) thick combination blades |
| Spindle Housing | Ductile cast iron spindle housing |
| Spindle Bearings | Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft |
| Height of Cut | 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration |
| Roll-Over Protection (ROPS) | 2-post ROPS and seat belt standard |
| Armrests | Standard |
| Ground Speed - Forward | 0-21 km/h |
| Mowing Speed | 0-11.3 km/h |
| Traction Drive (System) | Parallel hydrostatic, closed loop system with full-time 4WD forward/reverse in low (mow) and high (transport) range. Variable displacement piston pump with electronic servo control powers dual speed piston motor drive into double reduction planetary in front, and mechanical axle in rear. Smart Power® feature controls traction speed to maintain optimal cutting blade speed |
| Controls | Ignition switch, low and auto mow/transport range selection switch, PTO switch, light switch. Foot-operated traction pedal, individual foot-operated steering brake control of left and right wheels with parking brake lock. One 2-position lift switch |
| Steering Controls | Power steering with dedicated power source, tilt steering |
| Tyres | Front: 29" x 14" - 15”, 6-ply Rear: 20" x 10" - 10", 4-ply |
| Seat | Premium seat with adjustments for operator weight via air ride suspension, seat fore/aft position, seat back angle, arm rest height and retractable seat belt |
| Ground Clearance | 15.3 cm |
| Assembled Height Metric | 217 cm |
| Weight | 2,188 kg with full fluids |
| Warranty | 2 years limited. Refer to Operator's manual for more details. |
Contour™ Plus Rotary Cutting Unit
The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut and a modified rear discharge opening disperses clippings more evenly. An optional mulching kit and optional high height of cut blade are also available.
Smart Power® Traction
Smart Power® Traction allows even an inexperienced operator to achieve a consistent cut, even on hills and thick patches. By automatically adjusting ground speed when encountering heavy cutting conditions, optimum blade speed is maintained.
SmartCool™ Auto-Reversing Cooling Fan
Engineered with our exclusive SmartCool™ technology, so when things heat up under the hood, the system briefly reverses the cooling fan to blast chaff and debris from the air intake screens. The result, is non-stop improved productivity.
Mini InfoCentre™
With this feature you get helpful maintenance reminders and instant notification of potential problems. During normal operation, the InfoCenter displays clear and simple operating information at a glance, while constantly monitoring the internal health of the machine. Audible and visual alarms notify the operator of a potential problem. In the field or at the shop, technicians can quickly identify the source of the issue. Allows operator to adjust sensitivity of electronically controlled foot pedal when moving. This allows the supervisor to set a maximum mowing speed for greater control of operator usage and quality.
4-Wheel Drive
The Groundsmaster® 4500-D features a unique, parallel hydraulic traction system that assures full-time, bi-directional 4-wheel drive. Parallel hydraulic flow between front and rear wheels means that you will have 4-wheel drive assistance in turns, enabling easier trimming around objects without tire scuffing and dependable traction on hills and wet terrain.
Attractive Striping
Rear rollers provide an attractive striping effect while you mow, greatly enhancing the finished look of your turf.
Durable Design
Proven rugged frame, drivetrain, and components ensure durability and long life. Heavy-duty welded steel decks and frames provide extra durability and long life.
Easy Service
Decks can be raised or removed quickly, and enclosures can be pulled off without tools so technicians can get at everything effortlessly.