Groundsmaster® 4300-D
30879
Key Highlights
- The Contour™ Plus cutting technology takes quality of cut to a whole new level
- CrossTrax™ 4-wheel drive for superior hill-climbing
- Lightweight design means less weight and turf compaction
Key Highlights
- The Contour™ Plus cutting technology takes quality of cut to a whole new level
- CrossTrax™ 4-wheel drive for superior hill-climbing
- Lightweight design means less weight and turf compaction
The Groundsmaster® 4300-D rotary mower continues to provide the clean quality of cut of a reel mower but with the maintenance ease of a rotary. With a 2.3 m (90″) width of cut, the free-floating Contour™ Plus decks eliminate scalping, provide dramatic striping and deliver a picture perfect cut. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain.
The Groundsmaster® 4300-D has a lightweight footprint and CrossTrax® all-wheel drive for superior hill-climbing. The CrossTrax® system automatically transfers power from the front tyres to the opposite rear tyres to minimise spinouts and maximise traction on wet terrain. Its proven rugged frame, drivetrain and components ensure durability and long life.
With an average 2.67 hectares an hour of mowing capacity, Smart Power® with economy mode, switch-activated cruise control, electronically controlled hydrostatic pump and automatic, spring-applied parking brake, the Toro Groundsmaster 4300-D delivers unsurpassed performance and value.
| Engine | Yanmar® 3-cylinder, turbo-charged diesel, Tier 4 Final, Stage V |
| Engine Power (kW) | 43.4 hp (32.4 kW) |
| Fuel Type | Diesel |
| Fuel Capacity | 51.1 litres |
| Cooling System | Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity |
| Air Filter | Dry, replaceable primary and optional safety element |
| Cutting Width | 229 cm (90") |
| Mowing Rate | Up to 2.6 hectares/hr |
| Deck Design | Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels |
| Blades | 22” (55.9 cm) long, 2.5” (6.4 cm) wide, 0.25” (0.64 cm) thick combination blades |
| Spindle Housing | Ductile cast iron spindle housing |
| Spindle Bearings | Dual greaseable tapered roller bearings. 3.2 cm diameter solid cold finished steel spindle shaft |
| Height of Cut | 0.75" - 4" (1.9 cm - 10.2 cm) in 0.25" (0.6 cm) increments. 3-position 0.030" (0.08 cm) incremental calibration |
| Roll-Over Protection (ROPS) | 2-post ROPS and seat belt standard |
| Armrests | Standard |
| Ground Speed - Forward | 0-16.1 km/h |
| Mowing Speed | 0-11.3 km/h |
| Traction Drive (System) | Electronically controlled hydrostatic pump with individual wheel motors. CrossTrax® All-Wheel Drive system standard, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors |
| Controls | Single foot-operated traction pedal. Hand-operated key ignition switch, cutting unit raise/lower switch, cutting unit engage switch, parking brake switch, cruise control switch, and headlight switch all positioned on right hand pivoting control console |
| Steering Controls | Rear wheel, power steering with an independent hydraulic pump circuit |
| Tyres | Front: 26.5" x 14" - 12", 6-ply Rear: 20" x 12" - 10", 6-ply |
| Seat | Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt |
| Ground Clearance | 12.7 cm |
| Assembled Height Metric | 215 cm |
| Weight | 1,454 kg - with full fluids and 5 cutting units |
| Warranty | 2 years limited. Refer to Operator's manual for more details. |
Contour™ Plus Rotary Cutting Unit
The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut and a modified rear discharge opening disperses clippings more evenly. An optional mulching kit and optional high height of cut blade are also available.
Air Ride Seat Suspension (optional)
Convert the standard seat suspension to air-ride for rough applications to provide more comfortable ride for operators logging long hours in the seat.
CrossTrax® All-Wheel Drive
Based off our patented series/parallel 3-wheel drive kit, the CrossTrax® system automatically transfers power from the front tires to the opposite rear tires to minimise spinouts and maximise traction on wet terrain. ROPS and seat belt included.
Lighter Weight Design
Optimised design and use of lightweight materials means less weight and turf compaction without sacrificing performance and functionality.
High Height Blade
A new higher height of cut blade is now available in addition to the standard blade. This blade creates more lift and should be used in higher height of cut application. While there is no absolute height where the blade should be used, it should generally be used beginning at 2-1/4″ (5.7 cm) or 2-1/2″ (6.4 cm) height of cut.
Durable Design
Proven rugged frame, drivetrain, and components ensure durability and long life. Heavy-duty welded steel decks and frames provide extra durability and long life.
Easy Service
Decks can be raised or removed quickly, and enclosures can be pulled off without tools so technicians can get at everything effortlessly.
Improved Operator Comfort
All of the indicators and controls to operate the unit are conveniently located on the right armrest. Control console pivots back for right hand entry and exit. Tilt steering, deluxe suspension seat, improved visibility and lower operating noise enhance the operator experience and help to reduce fatigue
Smart Power® Traction
Smart Power® Traction allows even an inexperienced operator to achieve a consistent cut, even on hills and thick patches. By automatically adjusting ground speed when encountering heavy cutting conditions, optimum blade speed is maintained.
Electronic Cruise Control
Easily keep a consistent speed and reduce fatigue while mowing large areas.