Greensmaster® TriFlex® Hybrid 3420
04540
Key Highlights
- All-Electric Reel Drive to eliminate hydraulic leaks from the reel drive system
- The Double A-Arm suspension system maintains full floatation range to prevent gouging or scalping when going over undulations
- Lift-gate footrest allows easy access to the center cutting for simplified routine maintenance and repairs
Key Highlights
- All-Electric Reel Drive to eliminate hydraulic leaks from the reel drive system
- The Double A-Arm suspension system maintains full floatation range to prevent gouging or scalping when going over undulations
- Lift-gate footrest allows easy access to the center cutting for simplified routine maintenance and repairs
The Greensmaster® TriFlex® Mowers were designed to take precision cutting on a greens mower to a completely new level. Adopting the proven Flex suspension, the cutting units float freely over contours and undulations of the green resulting in a superior quality of cut and aftercut appearance. Improved serviceability is another major advantage of the TriFlex™ models. The tool-free, quick-change cutting units make servicing the cutting units fast and easy and a lift-gate footrest provides easy access to the center cutting unit.
| Engine | Kubota® D902, 3-cylinder, liquid cooled diesel |
| Power | 23.5 hp (17.5 kW) |
| Fuel / Power Source | Diesel |
| Fuel Capacity | 22.7 litres |
| Tyres | 19" x 10.5" - 8", 4-ply, Smooth Tread |
| Traction Drive System | 2WD parallel hydrostatic or optional 3WD series-parallel piston pump closed loop system |
| Foot pedal forward and reverse; infinitely variable | |
| Ground Speed | 0-16.1 km/h |
| Mowing Speed | 0-8 km/h |
| ROPS | Roll Over Protection System standard |
| Controls | Ignition: Off/Run/Start |
| Throttle: Low - High Idle | |
| Choke (AC only): Opens / Closes choke plate | |
| Parking Brake: Off - On | |
| Traction Pedal: Rev/Neutral/Forward | |
| Joystick: Raises/lowers reels also tap off feature for clean up pass | |
| Functional Control Lever sets neutral/mow/transport limits for traction pedal | |
| Noise Level | 84 dB(A) at operator’s ear under normal conditions |
| Steering Control | Adjustable steering wheel tilt and a 5-position steering arm tilt |
| Cutting Width | 150 cm (59") |
| Reel Drive | Electric |
| Blades | 8, 11 or 14 -Blade, High carbon steel blades |
| Reel Diameter | 13 cm |
| Height of Cut | Bench HOC .1.6 - 7.5 mm with high HOC Kit 7.3 - 25.4 mm |
| Height | 205 cm |
| Transport Width | 179 cm |
| Weight | 638 kg |
| Warranty | 2 years limited. Refer to Operator's manual for more details |
InfoCenter; Advanced Control for Hybrid Models
Easily customise clip for different heights of cut and adjust other operational settings to gain complete machine control. Common operation information displayed includes: reel speed, hours of function, system voltage for reels, diagnostic descriptions, and much more.
Maximise Fuel Economy to Improve Cost of Ownership
With more than enough horsepower and highly efficient components, the TriFlex Hybrid models operate efficiently in energy savings mode. While in this mode, engine RPM’s are reduced and the all-electric reel drive maintains a constant reel speed. This results in reduced fuel consumption and noise while maintaining quality of cut, performance, and productivity.
Sealed Electrical Components for Worry-Free Wash down
The electrical connectors and components are completely protected permitting machine wash down without worry.
Double A-Arm Suspension
The suspension system maintains full floatation range to prevent gouging or scalping when going over undulations.
Proven Flex Suspension (Patented)
Superior contour following capability utilizes an integrated “Flex” linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface.
Patented DPA Cutting Units
Precision manufactured cutting units with minimal adjustments and the proven ability to maintain adjustment for longer periods of time provide superior cutting performance.
Lift-In-Turn Cutting Units
The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce “triplex ring” for improved playability and turf health.
Exclusive Lift-Gate Footrest
Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift for cutting unit service saving you time, money, and frustration.
Tool-Free, Quick-Change Cutting Units
A single operator can go from cutting Greens at 3.2 mm ( 0.12″) to cutting a Fairway at 19 mm in just a few minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.
Superior Clippings Capture
Redesigned clipping capture system maintains a consistent gap between the basket and reel to retain nearly all grass clippings for a cleaner and healthier cut. In addition, a discharge shield forces clippings inside of basket and minimises “blow-by”.
Balloon Style Tyres
Tyres have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tire tracks.
Perfect Triangle Wheel Stand Design
The Triangle Wheel Stand places the rear wheel track within the radius of the front wheel, which prevents accidentally dropping the rear wheel into a nearby sand bunker while making the turn for the next mowing path.
All-Electric Reel Drive
In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW) that can increase up to 3.0 hp (2.2 kW) during peak load periods. This translates into the power you need when you need it for unparalleled performance in your most challenging cutting or verticutting applications.
Stored Energy
Eliminates clip marks at startup of mowing path.
Leak Detection
The dependable Turf Guardian™ leak detection system provides immediate audio and visual indication of possible hydraulic fluid leaks.