72″ (183 cm) Z Master® 5000 Series Rear Discharge
72922
Key Highlights
- Michelin® X® Tweel® turf tyres - get extra long wear life two to three times that of a pneumatic tyre at equal tread depth.
- TURBO FORCE® cutting deck - Built to last. Enjoy years of reliable performance with a 7-gauge high-strength steel
- Unitised pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
Key Highlights
- Michelin® X® Tweel® turf tyres - get extra long wear life two to three times that of a pneumatic tyre at equal tread depth.
- TURBO FORCE® cutting deck - Built to last. Enjoy years of reliable performance with a 7-gauge high-strength steel
- Unitised pump and wheel motor uses proven commercial hydraulic components while eliminating hoses and other potential leak points
Z Master 5000 Series mowers offer rear discharge decks for increased productivity in taller grass. These EFI models also use up to 25% less fuel than equivalent non-EFI mowers. The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds. Clippings are dropped within the path of the mower, saving time and cleanup.
The Tweel Turf Tyres means no air pressure to maintain, no flat tyres, no compromises. Extra long wear life two to three times that of a pneumatic tyre at equal tread depth.
Power System
| Engine | 26.5 hp Kohler® Command Pro EFI with Heavy-Duty Canister Air Cleaner |
| Fuel Capacity | 45.4 litres |
| Drive System | Twin Parker unitized 12 cc pump and 237.6 cc wheel motor assemblies with cooling fans |
| Ground Speed | 16.1 km/h |
| Caster Tyres | 13" x 6.5" - 6" (33 x 16.5 - 15.2 cm) Flat-Free Semi-Pneumatic |
| Drive Tyres | Airless radial 24" (60.96 cm) Michelin X Tweel Turf Tyres |
Mowing Deck
| Cutting Width | 183 cm (72") |
| Deck Design | 7-gauge high-strength steel TURBO FORCE® Rear Discharge with bull-nose bumper |
| Number of Blades | 3 |
| Spindle Housing | 22.9 cm diameter cast aluminium |
| Blade Tip Speed | 18,500+ ft/min |
| Discharge Chute | N/A |
| Height of Cut | 2.5 - 14 cm in 6.4 mm increments |
| Height of Cut Assist | Standard |
User-Friendly Features
| Seat | Handcrafted deluxe suspension seat with armrests featuring bullhorn accent |
| Armrests | Standard |
| Roll-Over Protection (ROPS) | Standard |
| Cup Holder | Standard |
| Hour Meter | Standard |
| Lighting | Optional |
| Hitch Bracket | Optional |
| Weight | 606 kg |
Warranty
| Warranty | 5 years or 1200 hours*** ***Whichever occurs first. Refer to Operator’s Manual for further details. |
Michelin® X® Tweel® Turf Tyres
No air pressure to maintain, no flat tyres, no compromises. Get extra long wear life two to three times that of a pneumatic tyre at equal tread depth.
Exclusive TURBO FORCE® Deck
The rugged TURBO FORCE® deck is constructed of 7-gauge, high-strength steel with bull-nose bumper, which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A Flat Crisp Cut with Precision Blades
0.63 cm thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.A Flat
Smarter design in a bull-nose bumper
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimise blowout of debris and dust. The bottom, leading edge of the deck is raised 6 mm, allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and autumn clean-up also is significantly reduced.
Smooth, Powerful Response
The new unitised pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.
Operator Information Centre
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Cast Aluminium Spindle
Cools quickly for enhanced durability and performance.