60″ (152 cm) Z Master® 6000 Series Horizon™
72946
Key Highlights
- The Toro® Next Gen Horizon™ Technology system - on-board intelligence platform that enables communication and response between key systems on the mower. It enhances the machines’ overall performance in a wide range of mowing conditions, hence increasing fuel efficiency.
- TURBO FORCE 7-gauge high-strength stee deck features heat-treated steel blades and our patented adjustable discharge chute
- Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations
Key Highlights
- The Toro® Next Gen Horizon™ Technology system - on-board intelligence platform that enables communication and response between key systems on the mower. It enhances the machines’ overall performance in a wide range of mowing conditions, hence increasing fuel efficiency.
- TURBO FORCE 7-gauge high-strength stee deck features heat-treated steel blades and our patented adjustable discharge chute
- Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations
The Toro Z Master® Professional 6000 EFI Series is Toro’s most advanced zero-turning radius mower. Everything added to this series was developed with the landscape professional in mind.
This model features 152 cm cutting deck, 999 cc Kohler® Electronic Fuel Injection (EFI) engine with Toro’s exclusive, Horizon™ Technology system and electronic governor (E-Gov) to provide maximum productivity with reduced carbon footprint and at the same time increase fuel efficiency. Its technology that refined the Z Master® to make a great commercial mower even better.
Model shown 74946
Power System
| Engine | 38 hp Kohler® Command Pro EFI ECV940 |
| Fuel Capacity | 45.4 litres |
| Drive System | Twin Parker unitized 16 cc pump and 280.2 cc wheel motor assemblies with cooling fans |
| Ground Speed | 18.5 km/h |
| Caster Tyres | 13" x 6.5" - 6" (33 x 16.5 - 15.2 cm) Flat-Free Semi-Pneumatic |
| Drive Tyres | 24" x 12" - 12" (61 x 30.5 - 30.5 cm) Turf Master |
Mowing Deck
| Cutting Width | 152 cm (60") |
| Deck Design | 7-gauge high-strength steel TURBO FORCE® with bull-nose bumper |
| Number of Blades | 3 |
| Spindle Housing | 22.9 cm diameter cast aluminium |
| Blade Tip Speed | 18,500+ ft/min |
| Discharge Chute | Rubber |
| Height of Cut | 2.5 - 14 cm in 6.4 mm increments |
| Height of Cut Assist | Standard |
User-Friendly Features
| Seat | Deluxe handcrafted triple tone Bullhorn suspension folding seat with large bolsters and thick. cushion. This seat is rubber mounted giving 3-D motion isolation. |
| Armrests | Standard |
| Roll-Over Protection (ROPS) | Standard |
| Cup Holder | Standard |
| Hour Meter | Standard |
| Lighting | Optional |
| Hitch Bracket | Optional |
| Weight | 575.6 kg |
Warranty
| Warranty | 5 year or 1400 hour*** (no hour limit in the first 2 years) ***Whichever occurs first. Refer to Operator’s Manual for further details. |
Kohler® EFI Engine
Kohler® Closed-Loop EFI engine provides the highest productivity with the lowest operating cost and reduced carbon footprint. It’s the easiest, the most reliable starting engine and backed by Kohler’s unlimited hour three year commercial warranty*. The electronic governor system eliminates governor droop and regulates the engine speed at varying loads, which improves fuel efficiency.
*Refer to Operator’s Manual for further details.
Toro Next Gen Horizon™ Technology and Electronic Governor (E-Gov)
The Toro® Next Gen Horizon™ Technology system is an on-board intelligence platform that enables communication and response between key systems on the mower. It enhances the machines’ overall performance in a wide range of mowing conditions, hence increasing fuel efficiency.
The Toro® Horizon™ system uses a speed control module and a throttle/rocker switch (Max, Economy and Low modes) to interact with the Kohler® EFI and electronic governor systems to command engine RPM and throttle plate angle according to load.
Exclusive TURBO FORCE® Deck
The rugged TURBO FORCE® deck is constructed of 7-gauge, high-strength steel with bull-nose bumper, which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
Semi-Pneumatic Flat-Free Caster Tyres
Eliminate time-consuming flats.
Unibody Frame
Lighter and more durable frame. The frame has been positioned lower to the ground, improving centre of gravity, balance and traction in most conditions. As an added perk, it’s made the machine easier to handle.
Twin Unitised Pump and Wheel Motor Transmissions with Cooling Fans
Proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.
Instrument Panel
The easy to see instrument panel includes a digital hour meter, fuel gauge, voltage meter and diagnostics indicators for troubleshooting at a glance.
Operator Comfort and Control
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
Folding Rollover Protection System
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.