4 in 1 Bucket

Designed to be used on the W323, W320-D Series II, WE500 Series II, TX 700 and TX 1000 models, this attachment offers the versatility of 4 attachments.

Standard bucket
With the jaws completely closed, use this attachment as a standard bucket. Open the 4-in-1 bucket jaws to dump the contents into a higher area than a standard bucket can reach.

Leveller
With the jaws completely open, use the bucket floor’s rear cutting edge as a leveller. Tip the bucket slightly forward so that the rear cutting edge of the bucket floor is on the ground and the forward edge is off the ground. Lower the cutting edge and begin levelling by dragging it in reverse across the surface of the ground.

Grapple rake
While using the traction units forward and reverse auxiliary function, the side jaws can be used for picking up material by closing them over objects or materials to be transported.

Blade
With the jaws completely open, use the back of the bucket as a blade to push material. Or, partially close the jaws and use the bottom of the front bucket to knock the top of clumps and grade with the rear blade.

Specifications:

Wide
Heaped capacity: 6.3 cubic feet
Struck capacity: 5.3 cubic feet
Overall width: 108 cm
Overall length: 68.5 cm
Overall height: 55.8 cm
Overall weight: 166 kg

Narrow
Heaped capacity: 5.3 cubic feet
Struck capacity: 4.3 cubic feet
Overall width: 88 cm
Overall length: 68.5 cm
Overall height: 55.8 cm
Overall weight: 145 kg