Toro Australia

Reelmaster® 5010-H (03674)

Reelmaster® 5010-H (03674)
Reelmaster® 5010-H (03674)


The Reelmaster® 5010-H gives you the power and performance you want with the fuel efficiency and reliability you need. Through its patented PowerMatch™ system, the Reelmaster® 5010-H utilises the power of a diesel engine in combination with a battery pack to supply over 40 horsepower, but only when conditions require. Electric motors on the cutting units, which feature low-friction seals and bearings on the reels, improve performance and reduce power requirements. The result is increased fuel efficiency, quieter operation, significantly fewer potential leak points and unmatched quality of cut.

The Dual Precision Adjustment (DPA) cutting units - featuring Toro’s all new EdgeSeries™ reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.

Hybrid Technology with PowerMatch™ System

Hybrid Technology with PowerMatch™ System

PowerMatch™ – Matches machine power output to what the conditions require. When hilly terrain and challenging mowing require more power than the 24.8 hp engine can provide, the Reelmaster 5010-H sheds the cutting unit load from the engine to the battery pack. If even more power is required, the battery pack boosts the engine power, giving the machine the equivalent of over 40 horsepower.

48 Volt Battery Pack

48 Volt Battery Pack

The battery pack is made up of four, 12-volt, Absorbed Glass Mat (AGM) batteries that are maintenance-free and sealed. The batteries are very similar to the ones used in the automobile industry for start-stop hybrids. These batteries are designed for a very long life when they are shallowly discharged and repeatedly recharged with a system like our PowerMatch™. Depending on usage, the life expectancy will vary, but in an average golf course duty cycle, the battery pack can be expected to last years of operation.

Electric Motors on The Cutting Units

Electric Motors on The Cutting Units

Removing the hydraulic cutting mowers and replacing them with electric motors on the Reelmaster 5010-H resulted in over 100 fewer leak points than a conventional 254 cm fairway mower. The remaining vehicle and cutting unit lift system hydraulic lines are predominately hard lines or hoses with limited movement, and are not subject to the same fatigue or service intervals as the cutting unit hoses and motors. As the electric reel circuit requires no scheduled maintenance, it further reduces the cost of ownership.

Efficient Reel Performance

Efficient Reel Performance

Consistent reel speed - the electric reel motors allow for precise setting of the clip and consistent power across all five cutting units for a superior cut. The cutting units also feature low-drag seals and low-friction bearing which improve wear and reduce the required horsepower to run the decks.

New Style Cutting Units with Hardened Reel Design

New Style Cutting Units with Hardened Reel Design

Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment. New style cutting units, which feature low-friction seals and bearings on the reels,  further reduce power demands and increase fuel efficiency. A new  hardened reel design enables longer edge retention thus reducing grinding and backlaping.

Precision Control

Precision Control

The InfoCenter™ display makes maintenance and diagnostics quicker and easier for technicians. The onboard LCD display provides system information alerts, service reminders, diagnostics, fault codes and vehicle and cutting unit adjustments that are easy to see and understand. Precisely control reel speed and clip rate, monitor reel performance and view reel diagnostics with the onboard InfoCenter™.

Toro Reelmaster® 5010-H - First fairway mower with a true hybrid drive system

Toro Reelmaster® 5010-H - First fairway mower with a true hybrid drive system

The Toro Reelmaster® 5010-H is the industry’s first and only fairway mower with a true hybrid drive system and gives you the power and perfomance you want with the fuel efficiency and reliability you need. Through its patented PowerMatch™ system, the Reelmaster® 5010-H utilises the power of a diesel engine in combination with a battery pack to supply over 40 horsepower when conditions require more power output.

Engine

24.8 hp (18.5 kW) Kubota® 3-cylinder, liquid-cooled, diesel engine.
Four 12v Absorbed Glass Mat (AGM), sealed, maintenance-free lead carbon batteries.

Cutting Width

254 cm 

Fuel Capacity

53 litres diesel fuel

Transport Speed

0-16 km/h forward, 0-6.4 km/h reverse

Mowing Speed

0-12.8 km/h

Height of Cut

8-Blade recommended range 1.3 cm-2.5 cm
11-Blade recommended range 0.6 cm – 1.9 cm

Traction Drive

Front drive wheels powered by a hydrostatic pump with individual wheel motors

Controls

Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, switch-operated throttle, isochronous engine speed control, cutting unit raise/lower joystick, cutting unit engage switch, and headlight switch all positioned on right hand pivoting control console.

Cooling System

Rear mounted radiator with industrial tube and fin construction, 6 fins per inch, 5.2 litres system capacity

Steering Control

Rear wheel, power steering with and independent hydraulic pump and circuit

Seat

Deluxe high back suspension seat with fore, aft, height and weight adjustment

Tyres

Front traction tyres: 26.5 x 14 - 12; Rear steer tyres: 20 x 12 - 10

Reel Drive

Reel drive circuit is split independently for front and rear cutting units. Reel speeds are electronically adjustable in nine incremental settings. On-board backlapping is standard.

Dimensions

Height: 160 cm to seat, 217.2 cm to ROPS
Length: 281.9 cm, Wheelbase: 152.4 cm
Operational Width: 294.6 cm, Transport Width: 233.7 cm

Weight

With 12.7 cm cutting units: 2WD – 1,259 kg, 4WD – 1,282 kg
With 17.8 cm cutting units: 2WD – 1,319 kg, 4WD – 1,345 kg

Warranty

2 years limited warranty. Refer to operator’s manual for further details.

Download Type Information
Toro Reelmaster 5010-H Brochure
Toro EdgeSeries™ Reels Brochure