Toro Australia

Toro P-220 Plastic Series Valves

Toro P-220 Plastic Series Valves
Toro P-220 Plastic Series Valves


25, 40, 50 and 80 mm Electric Models With superior regulation and a 1515 kPa rating, the P-220 Series gives you ‘brass strength’ at a value price.

1515 kPa maximum operating pressure

1515 kPa maximum operating pressure

Globe/Angle configuration

Globe/Angle configuration

Pressure control option with compact EZReg® dial-design (serviceable under pressure — no need to shut down system)

Pressure control option with compact EZReg® dial-design (serviceable under pressure — no need to shut down system)

Pressure regulates in electric and manual modes

Pressure regulates in electric and manual modes

Tough, double-beaded, fabric-reinforced rubber diaphragm rated at 5200 kPa burst pressure

Tough, double-beaded, fabric-reinforced rubber diaphragm rated at 5200 kPa burst pressure

Self-cleaning, stainless-steel metering rod

Self-cleaning, stainless-steel metering rod

Extended 5-year warranty

Extended 5-year warranty

Construction: Plastic - Tough 33% glass-filled (GFN) and stainless steel

Construction: Plastic - Tough 33% glass-filled (GFN) and stainless steel

Rugged, reinforced bonnet design withstands tough and high-pressure applications

Rugged, reinforced bonnet design withstands tough and high-pressure applications

Forward-flow design for more precise regulation

Forward-flow design for more precise regulation

Standard, built-in Schrader-type valve for downstream pressure verification

Standard, built-in Schrader-type valve for downstream pressure verification

No external tubing for either-electric or pressure-regulating models

No external tubing for either-electric or pressure-regulating models

Internal downstream manual bleed keeps valve box dry and allows for manually checking pressure regulation

Internal downstream manual bleed keeps valve box dry and allows for manually checking pressure regulation

External manual bleed for system flushing

External manual bleed for system flushing

Manual flow control: adjustable to zero-flow

Manual flow control: adjustable to zero-flow

Flow control independent of solenoid

Flow control independent of solenoid

Self-aligning bonnet to ensure correct installation

Self-aligning bonnet to ensure correct installation

Brass flow control stem — 50 mm and 80 mm models

Brass flow control stem — 50 mm and 80 mm models

Positive O-ring seal on inlet plug prevents leaks

Positive O-ring seal on inlet plug prevents leaks

Low flow capability down to 20 L/m with EZReg® module

Low flow capability down to 20 L/m with EZReg® module

Easily serviced without system removal

Easily serviced without system removal

Proven, encapsulated, injection-moulded solenoid with captured hex plunger and spring

Proven, encapsulated, injection-moulded solenoid with captured hex plunger and spring

Low power requirement for longer wire runs

Low power requirement for longer wire runs

45 cm lead wires for easy installation

45 cm lead wires for easy installation

Operating pressure – Electric — 70–1515 kPa
– Pressure regulating models
Outlet EZR–30 30–200 kPa (± 20 kPa)
Outlet EZR-100 30–700 kPa (± 20 kPa)
– Inlet 100–1515 kPa – Minimum pressure differential
(between inlet and outlet) 70 kPa for EZReg operation
Body styles Globe/angle valve, female-threads BSP
Solenoid 50 Hz 24 V.a.c.
– Inrush 0.3 amps, 7.2 VA