Irrigation : Agriculture
Accessories

Cobra Clamps

Cobra Easy-Fit hose clamps are made from 304 Grade Stainless Steel. They are fast and easy to assemble, and because they are stainless steel they are not affected by UV degradation, so no more problelms with clamps that disintegrate in the sun!

Cobra Clamps will fit any LD Poly and Dripline from 10 to 32 mm.

Cobra clips are colour coded, reusable and permanent.

Ocloc Vineyard Post Repair System

The Ocloc repair bracket is designed to modernise and reform the vineyard post repair process.

By using Ocloc and repairing the post in position, it enables a faster, stronger and safer process with all wires attached and no disturbance to the vine, resulting in major time and cost savings.

Irrigation Cable
Irritrol offers a range of wiring and connectors for the electrical components of an automatic irrigation system.

Irritrol Commercial Hose
A commercial watering hose designed with a tough white ribbed cover for high abrasion resistance and excellent visibility.

This hose was designed specifically for rural and commercial watering such as parks, golf courses, bowling greens, sports grounds, mobile sprinklers and general washdown applications. As a medium pressure hose it is also suitable for industrial air application showing good long term performance and flexibility.

Stakes, Risers and Accessories
Irritrol has a comprehensive range of Jet Stakes and Risers plus Mini Sprinkler Stakes and accessories.

Drip-Loc ™ Fittings, Punches, Plugs and Straps
A range of punches are available to suit the installation of drippers and jets. We also have repair plugs to repair wrongly punched holes.

uPVC Solvent Cement Fast Set
Type P for Pressure Pipes and Fittings to AS/NZS3879

uPVC Priming Fluid
For use with both Type N and Type P PVC Pipe Cements to AS/NZS 3879

Toro Gap Filling Pressure Pipe Cement
Type P for Large Diameter Pressure Pipes and Parallel Fittings

Scotchlok® Gel-Filled Wire Connector

Moisture resistant wire connector for two or three wire copper wire connections. Suitable for 0.5 mm2 cables. Maximum insulation OD is 2 mm for the two outside slots and 1.9 mm for the centre slot.

No need to strip the insulation back. Push the cable all the way to the stop. With all cables inserted, squeeze the green cap with a pair of pliers. Check the gel oozes out of the connector slots.

Test to ensure cables are firmly held within the connector.

Scotchlok® Gel-Filled 314IR, 316IR 2/3 Connector

Moisture resistant wire connector for two or three wire copper wire connections. Suitable for 0.5 – 1.5 mm2 (Maximum insulation OD is 3.8 mm)

No need to strip the insulation back. Push the cable all the way to the stop. With all cables inserted, squeeze the green cap with a pair of pliers. Check the gel oozes out of connector slots.

Test to ensure cables are firmly held within the connector.

314IR 0.5 – 1.0mm2

316IR 0.5 – 1.5mm2

Twist Lock Gel-Filled Connector

Silicone filled moisture resistant connector for multiple copper wire connections. Suitable for joining between a minimum of 2 x 1mm2 up to a maximum combination of 2 x 6mm2.

Strip wires to 20mm, group bare wire ends together. Insert wires through flexible sealing fingers, Pre-twisting is unnecessary – unless using stranded wire. (Wrap stranded wire around solid wires).

Bend wires over completely into one V-channel. Squeeze inner sleeve into pre-filled outer sleeve against hand until locked.

Snap-Sure Wire Connector

Suitable for connection of up to 3 x 0.5-1.0 mm2, 2 x 1.5-2.5mm2 copper cables. Important: Must be used with sealant gel (Ordering information 1012592) to avoid corrosion of copper cables.

Bare each cable back 12 mm. Twist cables together and slip through crimping ring. Crimp the ring securely onto the combined cables. Fill the connector completely with sealant before pushing the cap on and snapping closed. Sealant should ooze out through holes around the wires and copper. Ensure that no copper cable is exposed and the connection is secure.

DS-500 DRI-SPLICE Wire Connectors
Specially designed for irrigation systems, low voltage lighting, marine and security systems. Fast and reliable way of making a positive, waterproof wire connection.

3M DBY/DBR Direct Bury Splice Kits
3M DBY/DBR Direct Bury Splice Kits are real time savers when installing underground electrical
systems. Every component for the splice is included in the kit.

3M Scotch 35 Vinyl Electrical Tape®ainbow Pack
A premium grade electrical tape that stretches to conform to virtually any shape that requires colour coded insulation.

3M Scotch 2210 Vinyl Mastic Roll
Self-fusing, rubber based insulating compound laminated to a flexible, all-weather grade PVC backing.

3M Cable Tie assortment Pack
3M Cable Ties secure wire bundles and harness components quickly without slipping. The self locking head, with heavy double teeth on the one-piece lock mechanism, assures locking reliability.

Mazzei Injectors
Toro offer the Mazzei Injector series of pressure differential venturi injection equipment to either apply liquid fertiliser or chemicals and water treatment additives to the irrigation systems.

Irrigation Water Meters
- 15mm to 40mm, Single Jet, Multi Jet
- 50mm to 300mm, Single Jet
For use in agricultural, commercial turf and landscaping irrigation systems where total water usage is required. A factory fi tted pulse output enables the water meter to be connected to a suitable
irrigation controller to monitor flow rates and the controller to create flow alarms for valve and mainline failure.
Not suitable for Water Authority metering